Wireless high-voltage voice phase detector

The high-voltage wireless voice nuclear phase detectoris a newly developed new nuclear phase product, which can be used in 6, 10, 35, 66, 110, 220, 330, 500KV systems respectively to determine whether the phase of the two power grids (generator sets) is the same, so as to determine the grid connection. The insulating tube of the high-voltage nuclear phase device adopts high-performance insulating materials, and the nuclear phase instrument adopts a plastic shell matched with a movable bracket, so that the viewing angle of the nuclear phase instrument can be changed flexibly on the insulating tube conveniently, and the use and installation are simple and easy.
 

product characteristics

1, in the nuclear phase, regardless of whether the phase is the same, there are language and light tips.
2, the high voltage nuclear phase device can be used 220V or 380V low voltage to check whether the nuclear phase instrument is normal.
3, nuclear phase instrument with automatic power switch inside, when the power automatically open, not when the power automatically closed, convenient, save electricity.
 

Product nickname

Phase nuclear device, phase nuclear instrument, phase nuclear device, high voltage phase nuclear device, high voltage phase nuclear instrument, voice phase nuclear device, voice phase nuclear instrument, wireless phase nuclear device, wireless phase nuclear device, digital phase nuclear device, digital phase nuclear device, phase fixer, high voltage phase fixer

product technology

1, screen display content: wireless nuclear phase instrument, different phase, in phase, X, Y and its waveform, phase angle;

2, automatic shutdown: 15 minutes after the boot, the host automatically shut down;

3. Backlight source: In the process of detecting phase, if the light is too dark, it is difficult to read the data.

4. Accuracy: self-calibration error 2. Field test: in-phase error 10. out-of-phase error 15.

5, sampling rate 3 times/second;

6, the host power supply is 9V 2V;

7, X and Y collector power supply voltage is 7.5V 1.5V;

8, host operating current 7mA;

9, X and Y collector working current 4mA ;

10. The line-of-sight transmission distance of the host and X and Y collectors is X 80m and Y 50m;

More information consulting Wuhan Huaneng Lianchuang Electric Co., Ltd. manufacturers, about the product process, product materials, quality control, after-sales protection introduction, buyers rest assured to buy